Line Follower Robot

Aim:

The main aim of the project is to make a robot which follows the black line to move.

Components Required:

Sr. No	Component	Quantity
1	TeBoT	1
2	TeBoT Cable	1

Connection and Code Upload:

Step 1: Connect the TeBoT with your device by using the cable and turn on TeBoT.

Step 2: Select the board and port, then upload the code.

Warning: If you face any issue while uploading the code, then first “OFF” the TeBoT. Next, turn “ON” the TeBoT. Press the “BOOT” button for a short time then press the “RESET” button once. Then release the “BOOT” button.

You will get a drive. Then upload the code.

Step 3: Now remove the cable and place the TeBoT on the black line and press the button (A/D23).

Conclusion: From this project we got the idea about all components, connection of those components and made a line follower robot.