Mood Lamp

Aim:

The main aim of the project is to make the mood lamp on TeBoT.

Components Required:

Sr. No	Component	Quantity
1	TeBoT and cable	1
2	TeBoT Connector	1
3	Jumper Wires(M-F)	4
4	RGB LED	1
5	Breadboard	1

RGB LED Pinouts:

Connection and Code Upload:

Step 1: Connect the TeBoT with your device and turn on it.

Step 2: Select the board and port, then upload the code.

Warning: If you face any issue while uploading the code, then first “OFF” the TeBoT. Next, turn “ON” the TeBoT. Press the “BOOT” button for a short time then press the “RESET” button once. Then release the “BOOT” button.

You will get a drive. Then upload the code.

Step 3: Connect the RGB LED on Breadboard.

Step 4: Connect the connector on TeBoT.

Step 5: Now take the RGB LED and connect with TeBoT.

RGB LED	↔	TeBoT Connector
Red	↔	Pin No 3
Green	↔	Pin No 4
Blue	↔	Pin No 5
-VE	↔	GND

Now, turn on the TeBoT. You will see the RGB LED will glow in three Colors.

Conclusion: From this project we got the idea about all components, connection of those components and made the Mood Lamp.