Ultrasonic Distance Display

Aim:

The main aim of the project is to measure distance by using ultrasonic sensor and you can see it on TeBoT.

Components Required:

Sr. No	Component	Quantity
1	TeBoT and cable	1
2	Ultrasonic Sensor	1

Connection and Code Upload:

Step 1: Connect the TeBoT with your device and turn on it.

Step 2: Select the board and port, then upload the code.

Warning: If you face any issue while uploading the code, then first “OFF” the TeBoT. Next, turn “ON” the TeBoT. Press the “BOOT” button for a short time then press the “RESET” button once. Then release the “BOOT” button. You will get a drive. Then upload the code.

Step 4: Now take the ultrasonic sensor and connect on TeBoT.

Now turn on TeBoT. Then push the button (A/D23) and take your hand in front of sensor. You will see the distance in serial monitor and also on the TeBoT.

Conclusion: From this project we got the idea about all components, connection of those components and made the ultrasonic distance display on TeBoT.